China wholesaler D3 D4 D5 D6 D9 D65 D85 D155 Sprocket Bulldozer Sprockets sprocket dropship

Product Description

Condition: New
Applicable Industries: Machinery Repair Shops, Construction works 
After Warranty Service: Video technical support, Online support
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product 2571
Place of Origin: ZheJiang , China
Brand Name: Qiquan
Warranty: 1 Year
After-sales Service Provided: Video technical support, Online support
Certification: ISO9001
Color: black or yellow
Material: 35 MnB/40Mn2
Surface Hardness: HRC52-58
Hardness Depth: 8-12mm
Name: Crawler Excavator Sprocket

Supply Ability
Supply Ability: 60000 Pieces per year

Packaging & Delivery
Packaging Details: Standard exported wooden pallet or negotiation
Port: HangZhou port

 

 

Material

35MnB/40Mn2
Finish Smooth
Colors Black or yellow
Technique Forging
Surface Hardness HRC52-58,deepth:8mm-12mm
Warranty time 1 year
Certification ISO9001
Delivery Time Within 30 days after contract established

BRAND CATALOGUE
BULLDOZER D20 D30 D31 D37 D40 D41 D45 D50 D60
D65 D68 D75 D80 D85 D150 D155 D275 D355
D3C D3D D4C D4D D4H D5 D6C D6D D6H
D7G D8K D8N D9N D10N D11N      
KOMAT SU PC30 PC40 PC45 PC60 PC75 PC100 PC120 PC150 PC200
PC220 PC300 PC350 PC400          
CATERP ILLAR E70B E110 E120B E215 E235 E307 E311 E312 E322
E180 E240 E200B E320 E300 E300B E330 E325  
HITACHI EX30 EX40 EX60 EX100 EX120 EX200 EX220 EX270 EX300
EX400 EX600 UH043 UH052 UH53 UH07 UH081 UH082 UH083
FIAT-HITACHI FH120 FH130 FH150 FH200 FH220 FH270 FH300    
VOLVO EC55 EC130 EC150 EC200 EC210 EC240 EC290 EC360  
DAEWOO DH55 DH130 DH180 DH200 DH280 DH300 DH320    
HYUNDAI R60 R130 R200 R210 R220 R290 R320 R914  
KATO HD250 HD400 HD450 HD700 HD770 HD820 HD1250    
KOBELCO SK40 SK60 SK100 SK120 SK200 SK220 SK04-2 SK07  
SK07N2 SK09 SK12 SK14 SK300 SK310 SK400    
JCB JS70 JS75 JS110 JS130 JS160 JS180 JS200 JS220  
JS240 JS260 JS300 JS330          
SUMITOMO SH70 SH100 SH120 SH160 SH200 SH260 SH265 SH280 SH300
SH340 LS2650 LS2800 LS3400 LS4300        
  MX8 SE200 SE210 SE280 MX292 SE350      
MITSUBISHI MS110 MS120 MS140 MS180          

 

All manufacturer’s names,symbols&descriptions are used for reference purpose only,and it is not implied that and any part listed is the product of these manufacturers.
 

1. You are a trader or a manufacture?
We are an industry and trade integration business, our factory located on HangZhou Nanan Distric, and our sales department is in City centre of HangZhou. The distance is  80Kms, 1.5 hours.

2. How can I be sure the part will fit my excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.

3. How about the payment terms?
We usually accept T/T or Trade Assurance. other terms also could be negotiated.

4. What is your minimum order?
It depends on what you are buying. Normally, our minimum order is one 20′ full container and LCL container (less than a container load) can be acceptable.

5. What is your delivery time?
FOB HangZhou or any Chinese port : 20 days . If there are any parts in stock , our delivery time is only 0-7 days.

6. What about Quality Control?
We have a perfect QC system for the perfect products. A team who will detect the product quality and specification piece carefully, monitoring every production process until packing is complete, to ensure product safety into container.

After-sales Service: Video Technical Support, Online Support
Warranty: 1 Year
Type: Construction Machine
Application: : Machinery Repair Shops, Construction Works
Certification: ISO9001: 2000
Condition: New
Customization:
Available

|

Customized Request

sprocket

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China wholesaler D3 D4 D5 D6 D9 D65 D85 D155 Sprocket Bulldozer Sprockets     sprocket dropshipChina wholesaler D3 D4 D5 D6 D9 D65 D85 D155 Sprocket Bulldozer Sprockets     sprocket dropship
editor by CX 2023-05-25

Aluminum Sprocket

As one of the aluminum sprocket manufacturers, suppliers, and exporters of mechanical products, We offer aluminum sprockets and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of aluminum sprockets.

Recent Posts