China factory Energy Saving Electric Induction Heating Equipment Manufacturer (JL-40) with Best Sales

Item Description

Power Conserving Electric Induction Heating Gear Producer (JL-40)

Primary Feature:

  1. It adopts the most advanced MOS, IGBT frequency conversion management technologies to recognize automated tracking of frequency.
  2. It has the consistent existing and electrical power handle purpose, which can significantly enhance steel heating approach, comprehend the high performance and rapidly heating and deliver into enjoy the superior overall performance of the goods.
  3. About 10 kinds fault protection and display of more than-recent, in excess of-voltage, h2o scarcity and section missing can offer larger trustworthiness and sturdiness.
  4. It is secure and trustworthy, and calls for no equipments of 10 thousand voltage, and therefore can make sure the safe operation.
  5. It is available for infrared temperature measurement, which can understand the automated manage of temperature, increase the heating performance and simplify the guide operation.

Specialized Parameters: 

Product JL-40KW
Enter energy need 3 section 380V  50/60HZ
Max oscillate power 40KW
Max enter existing 48A
Oscillate frequency 30-100KHZ
Cooling water want >0.3MPa ≥6L/Min
Responsibility cycle one hundred% 40°C
Dimensions(L*W*H) Generator: 290*560*550mm
Transformer: 470*260*430mm
Web excess weight 35kg/30kg
Cable size 2-6(Meters)

Spare Parts for JL-40KW

Product Name of device or areas Specification Amount
one JL-40KW Induction heater one pcs
2 Foot pedal  three main 1 pcs
3 Induction Coils 2 sets
four H2o Cable 1 set
five Instruction Handbook 1 pcs
6 Solution catalog two sets

 

Main Parts Introduction 

  • Germany SIEMENS INFINEON IGBT Module. ( 40-60KHZ oscillation frequency, fast response time, superhigh stability, almost spatter-free welding )
  • Japan Nichicon electrolytic capacitor. ( filter capacitor )
  • Imported transistor integrated block.
  • All water pipe use thermostabilityHigh pressure resistance best quality material.
  • Main card, signal circuit, drive circuit board,control circuit board and components are adopted:Toshiba, Hitachi,Motorola, China’s top manufacturers. 
  • International advanced all-strong-point out semiconductor power devices.
  • Technical advantage:perfect control, alarm display circuit, getting full automatic tracking frequency, continuous adjustable power, safe dependable protection,clear and accuracy data display and etc.
  • Superiority Advantages: fast heating, wide application, small size, easy installation, simple operation, low power consumption, high efficiency.

Images of Device

Applications: Forging, Warmth therapy, Melting, Welding, and so on.

one.Forging Molding
   M.F. forging CZPT is utilised for the heating of bars and rods larger than Φ12, the substance can be steel, stainless metal, copper, brass ,aluminium and so on.  The heating can be the total rod, end of the rod or middle component of the rod.
   Application Illustrations:Fasteners, Components equipment, Automobile and motorbike components, Rigging, CZPT fittings, Twist drill, Atlas, Desk, CZPT parts, Regular parts, Handicrafts, Equipment areas, Brass lock, Lock, Rivets, Other components and metallic components.

2.Heat therapy:such as Quenching, Annealing
    Heat remedy method is the metallic function-pieces heated to a particular temperature, acquired diverse matrix group after diverse methods of cooling, so that to obtain the required mechanical homes (material more difficult or softer), these kinds of as quenching, annealing, and so forth.
     Applications Illustrations: Shaft, Shaft main, Plate, Gear, Sprocket, Steel belt, Machine resource components, Xihu (West Lake) Dis. rail, Hardware resources, Small mould, Mould components, CAM, Auto and bike accessories, Scissors, Backyard shears blade, Chuck, mechanical areas, Stainless metal merchandise, Cistern, Kitchen ware, Golf head, Golf equipment, Steel tube, Household furniture fittings and Other connected items.

three. Melting
    Mainly utilised for melting and warmth preservation of Cast iron, Alloy metal, Stainless steel, Gold, Silver, Other CZPT resources, as effectively as Copper, Brass, Bronze, Aluminum, Zinc, and Other non-magnetic resources.

Model JL-40KW
Capacity 2KG Platinum
Melting pace five-8mins every pot

4.Brazing, Welding, Soldering
    Brazing is a fusion and solidification procedure which refers to the use of CZPT field induction heating to make the temperature of metallic components junction get to the melting stage of welding, or the temperature of steel resources to get to amongst nonmetallic content.
      (1). Any industry of insert welding material connection.
      Such as: Slicing resources ( Turning, Milling cutter, Woodworking tools, Serrated blade, Shoe components, Diamond resource, Deep hole drilling, Drilling and so forth.), Faucets, Bathroom equipment, Showers, Coal drill, Drill bit, Terminal blocks, Furniture fittings, Refrigeration gear, Pad tube, Heating plate, Egg beater, Lighting accessories, Department distributor, Bicycle up and down the fork iron, Copper pieces, Aluminum, Stainless steel.
    (2). Do not insert welding material connection.
      Such as: Computer radiator core and copper core, Motor rotor and shaft, CZPT web preparetions, Hanger hook, Copier carbon brush melt, Aluminum-plastic pipe, Compound preparetions kettle, Resource shank treatment, Tableware curing rubber deal with, Battery pole ear forming, Aluminum foil sealing etc.

Package

 

Our Solutions:

one. Pre-sale service:

  • Recommend the most suitable machine for customers, according to their requirements. 
  • Inquiry and consulting support. 
  • Sample testing support. 
  • View our Factory.

two. In-sale service:

  • Strictly manufacture the machine, according to relevant technical standards.
  • Take run test, according to relevant equipment test run regulations.
  • Strictly check up the machine, before delivery
  • Delivery on time.

3. Following-sale service:

  • 12 months warranty period
  • Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, Jinlai shall provide replacement parts after detecting the faults.
  • If any big quality problems occurs out of the guarantee period, Jinlai will send maintenance
  • Technician to provide visiting service after checking with the customer and charge for a favorable price. 
  • Jinlai will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
  • The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.

FAQ
China Provides Induction Heating Electricity Source   
Questions and Answers:

1. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.

2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.

three.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.

4. Which export port you use?
Any China port, commonly we will use HangZhou ,HangZhou ,Hongkong port, it can appoint as you like.

5.How about the payment terms and delivery time ?
Payment phrases for tiny machines: 100% T/T/ Western Union/Cash in progress.
The large equipment and large volume: 30% deposit,70% before shipment (we will shoot total delivering process for customer’s confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.

6.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.

7.Is your goods has ISO9001 or CE certificate ?
Yes, all our goods has ISO and CE certification. All equipment are substantial quality merchandise.

8.What is your nature of your company:supplier or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and get in touch with us. 

 

High Frequency Collection JL (thirty-100KHZ)

Design JL-five JL-fifteen JL-25 JL-30 JL-40 JL-50 JL-sixty JL-eighty
Enter electrical power wish Single phase 220V  50/60HZ 3 stage 380V 50/60HZ
Oscillate energy max 5KW 15KW 25KW 30KW 40KW 50KW 60KW 80KW
Max input present 20A 37A 24A 38A 48A 65A 80A 105A
Oscillate frequency one hundred-250KHZ 30-100KHZ thirty-100KHZ 30-100KHZ thirty-100KHZ 30-100KHZ 30-100KHZ thirty-80KHZ
Cooling h2o desire >0.2MPa  2-6L/Min 0.3Mpa≥6L/MIN
Duty cycle eighty% 40°C 80% 40°C a hundred% 40°C one hundred% 40°C a hundred% 40°C one hundred% 40°C a hundred% 40°C a hundred% 40°C
Internet bodyweight 19kg 21kg 28kg 25kg/23kg 35kg/30kg 45kg/30kg 50kg/30kg 80kg/85kg
Cable duration 2-6(Meters)

Preserve your method on the cutting edge with ep sprockets and uncover distinct premium brand names. Ep sprockets are high-good quality heat-handled metal to stand up to hefty shock masses, resist use and supply a lengthy services life. Alloy and stainless steel sprockets are also obtainable for extra corrosion resistance and food-grade apps
Bushing Sprockets: Bushing sprockets can simplify chain program maintenance by replacing only worn sprocket assemblies, whilst the bushings can still be reused. The bushing also has a tightly tapered mating surface that can transmit greater torques than simple crucial elements. Shut-fitting surfaces give better overall performance in purposes with large begin/stop functions or shock masses.

China factory Energy Saving Electric Induction Heating Equipment Manufacturer (JL-40)     with Best Sales

TAGs:

Aluminum Sprocket

As one of the aluminum sprocket manufacturers, suppliers, and exporters of mechanical products, We offer aluminum sprockets and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of aluminum sprockets.

Recent Posts